DAB Valves - Gravity Flap Diverter





Gravity Flap Diverter Valve
The GF Range medium/heavy duty gravity flap diverter valves

These valves are intended for general purpose use on medium/heavy duty applications having typical inlet sizes of 100 up to 400. their design and construction can change significantly depending upon the application, but as fabricated units they can be readily customised to suit most requirements.

Typical duties are free falling product diversion, diversion of differently specified materials, rejection of out of specification or contaminated product, diversion during maintenance, diversion to alternate fill positions for greater filling efficiency.
 
  • Construction - mild steel, stainless steel or composite specials.

  • Inlets square, round or rectangular stubs or flanges.

  • Outlets square or rectangular with optional transition piece to round flanges or stubs.

  • Operation handlever, chainwheel, electro-pneumatic or motorised.

  • Flap Plate - mild steel or stainless steel.

  • Flab seal - white f/q rubber, silicon rubber, polyurethane.

  • Finish blue/silver hammer, natural, bead blast, polished or custom.

  • Options high temperature, positive pressure and vacuum versions are available.


The GFE Versions Even Leg Style
These valves have symmetrical legs at a standard off-set of 40 degrees to the vertical. Custom angles are available as determined by the product characteristics.

The GFO Versions Odd Leg Style
These valves have straight through leg and an off-set leg typically at 40 degrees. Again custom angles area available to suit the application.

The GFS Versions Special and Multiple Leg Style
These valves have symmetrical legs at a standard off-set of 40 degrees to the vertical. Custom angles are available as determined by the product characteristics.


 

 
DAB Valves Limited, Registered in England and Wales No 3671911.

Registered Office: White Meadow Farm, Parwich, Ashbourne, Derbyshire, DE6 1QY. VAT No 716496903.